Carbon Nanotubes Coating for Micropunch
DOI:
https://doi.org/10.6000/2369-3355.2022.09.02Keywords:
Multi-walled carbon nanotubes (MWCNTs), Coating, Micropunch, Green technique, Waste alcohol, Nanotechnology, Service lifeAbstract
The multi-walled carbon nanotubes (MWCNTs) were coated on micropunch homemade equipment with the waste alcohol as a resource. The correlated characteristics were evaluated by scanning electron microscopy (SEM), transmission electron microscope (TEM), and Raman spectroscopy. Moreover, the synthesized MWCNTs were grown on some micropunches to confirm the relevant, beneficial effect on the service life of micropunches compellingly and convincingly. The results indicate that MWCNTs coated on micropunch can enhance its service life up to 35% of that without MWCNTs. Due to the lubrication of MWCNTs coating between the micropunch and the specimen, the wear of the micropunch coated with MWCNTs distinctively decreases, even in the severe wear period. As a result, the correlated wear loss is also less than that of the micropunch without MWCNTs coating, ascribed to the graphitic nature of MWCNTs. Meanwhile, because of the usage of the waste alcohol, the technique of the relevant synthesized MWCNTs is green to the environment, which is promising for practical applications.
References
Iijima S. Single-shell carbon nanotubes of 1-nm diameter. Nature 1993; 363: 603-5. https://doi.org/10.1038/363603a0 DOI: https://doi.org/10.1038/363603a0
Iijima S. Helical microtubules of graphitic carbon. Nature 1991; 354: 56-8. https://doi.org/10.1038/354056a0 DOI: https://doi.org/10.1038/354056a0
Rathinave S, Priyadharshini K, Panda D. A review on carbon nanotube: An overview of the synthesis, properties, functionalization, characterization, and the application. Materials Science and Engineering: B 2021; 268: 115095. https://doi.org/10.1016/j.mseb.2021.115095 DOI: https://doi.org/10.1016/j.mseb.2021.115095
Rashed AO, Merenda A, Kondo T, Lima M, Razal J, Kong LX, Huynh C, Dumée LF. Carbon nanotube membranes - Strategies and challenges towards scalable manufacturing and practical separation applications. Separation and Purification Technology 2021; 257: 117929. https://doi.org/10.1016/j.seppur.2020.117929 DOI: https://doi.org/10.1016/j.seppur.2020.117929
Zhai P, Isaacs JA, Eckelman MJ. Net energy benefits of carbon nanotube applications. Applied Energy 2016; 173: 624-64. https://doi.org/10.1016/j.apenergy.2016.04.001 DOI: https://doi.org/10.1016/j.apenergy.2016.04.001
Reinert L, Varenberg M, Mücklich F, Suárez S. Dry friction and wear of self-lubricating carbon-nanotube-containing surfaces. Wear 2018; 406-407: 33-42. https://doi.org/10.1016/j.wear.2018.03.021 DOI: https://doi.org/10.1016/j.wear.2018.03.021
Abbas A, Huang SJ, Ballóková B, Sülleiová K. Tribological effects of carbon nanotubes on magnesium alloy AZ31 and analyzing aging effects on CNTs/AZ31 composites fabricated by the stir casting process. Tribology International 2020; 142: 105982. https://doi.org/10.1016/j.triboint.2019.105982 DOI: https://doi.org/10.1016/j.triboint.2019.105982
Duntu SH, Eliasu A, Ahmad I, Islam M, Boakye-Yiadom S. Synergistic effect of graphene and carbon nanotubes on wear behaviour of alumina-zirconia nanocomposites. Materials Characterization 2021; 175: 111056. https://doi.org/10.1016/j.matchar.2021.111056 DOI: https://doi.org/10.1016/j.matchar.2021.111056
Mohamed A, Tirth V, Kamel BM. Tribological characterization and rheology of hybrid calcium grease with graphene nanosheets and multi-walled carbon nanotubes as additives. Journal of Materials Research and Technology 2020; 9(3): 6178-85. https://doi.org/10.1016/j.jmrt.2020.04.020 DOI: https://doi.org/10.1016/j.jmrt.2020.04.020
Akbarpour MR, Alipour S, Najafi M. Tribological characteristics of self-lubricating nanostructured aluminum reinforced with multi-wall CNTs processed by flake powder metallurgy and hot pressing method. Diamond and Related Materials 2018; 90: 93-100. https://doi.org/10.1016/j.diamond.2018.10.004 DOI: https://doi.org/10.1016/j.diamond.2018.10.004
Zengin E, Ahlatci H, Zengin H. Investigation of microstructure, tribological and corrosion properties of AISI 316 L stainless steel matrix composites reinforced by carbon nanotubes. Materials Today Communications 2021; 29: 102758. https://doi.org/10.1016/j.mtcomm.2021.102758 DOI: https://doi.org/10.1016/j.mtcomm.2021.102758
Priyadershini S, Rahman OSA, Pandey KK, Keshri AK. Remarkable improvement in tribological behavior of plasma sprayed carbon nanotube and graphene nanoplatelates hybrid reinforced alumina nanocomposite coating. Ceramics International 2019; 45(5): 5768-78. https://doi.org/10.1016/j.ceramint.2018.12.043 DOI: https://doi.org/10.1016/j.ceramint.2018.12.043
Luz AR, de Souza GB, Lepienski CM, Siqueira CJM, Kuromoto NK. Tribological properties of nanotubes grown on Ti-35Nb alloy by anodization. Thin Solid Films 2018; 660: 529-37. https://doi.org/10.1016/j.tsf.2018.06.050 DOI: https://doi.org/10.1016/j.tsf.2018.06.050
Mark JJ. Microfabrication and nanomanufacturing. Boca Raton FL CRC/Taylor & Francis 2006.
Cummins C, Lundy R, Walsh JJ, Ponsinet V, Fleury G, Morris MA. Enabling future nanomanufacturing through block copolymer self-assembly: A review. Nano Today 2020; 35: 100936. https://doi.org/10.1016/j.nantod.2020.100936 DOI: https://doi.org/10.1016/j.nantod.2020.100936
Ikumapayi OM, Akinlabi ET, Adeoye AOM, Fatoba SO. Microfabrication and nanotechnology in manufacturing system – An overview. Materials Today: Proceedings 2021; 44(1): 1154-62. https://doi.org/10.1016/j.matpr.2020.11.233 DOI: https://doi.org/10.1016/j.matpr.2020.11.233
Guo KW. The Wear Characteristics of WC/Co Micropunch. Micro and Nanosystems 2009; 1: 205-9. https://doi.org/10.2174/1876402910901030205 DOI: https://doi.org/10.2174/1876402910901030205
Guo KW, Tam HY. Effects of extended punching on wear of the WC/Co micropunch and the punched microholes. International Journal of Advanced Manufacturing Technology 2011; 59: 955-60. https://doi.org/10.1007/s00170-011-3567-0 DOI: https://doi.org/10.1007/s00170-011-3567-0
Rather SU. Preparation, characterization, and hydrogen storage studies of carbon nanotubes and their composites: A review. International Journal of Hydrogen Energy 2020; 45(7): 4653-72. https://doi.org/10.1016/j.ijhydene.2019.12.055 DOI: https://doi.org/10.1016/j.ijhydene.2019.12.055
Cortés-López AJ, Muñoz-Sandoval E, López-Urías F. Efficient carbon nanotube sponges production boosted by acetone in CVD-Synthesis. Carbon 2018; 135: 145-56. https://doi.org/10.1016/j.carbon.2018.04.046 DOI: https://doi.org/10.1016/j.carbon.2018.04.046
Mohamed GH. The MEMS handbook. Boca Raton FL CRC/Taylor & Francis 2006.
Guo KW. Chapter 9 - Approaches to microholes for fabrication of microdevices. Micro- and Nanotechnology Enabled Applications for Portable Miniaturized Analytical Systems. Micro and Nano Technologies 2022; 197-216. https://doi.org/10.1016/B978-0-12-823727-4.00006-7 DOI: https://doi.org/10.1016/B978-0-12-823727-4.00006-7
Downloads
Published
How to Cite
Issue
Section
License
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .