Evidence of Chemical Reaction in Binary Blends of Polycarbonate and a Semi-Flexible Liquid Crystal Polymer
DOI:
https://doi.org/10.6000/1929-5995.2021.10.8Keywords:
Liquid crystal polymer, polycarbonate, binary blend, chemical reaction, transesterificationAbstract
In this study, we provide the experimental results of the binary blends of a semi-flexible nematic liquid crystal polymer (LCP1) and polycarbonate (PC) within their phase diagram. The LCP1/PC blends were investigated by Differential Scanning Calorimetry (DSC), Optical Microscopy (OM), Wide-angle X-Ray Diffraction (WXRD), Fourier Transfer Infrared (FTIR), Gel Permeation Chromatography (GPC), and Nuclear Magnetic Resonance (NMR) techniques and observed the evidence of chemical reaction between LCP1 and PC in their heat-treated blends possibly by transesterification mechanism.
References
Carfagna C, Ed., Liquid Crystalline Polymers, 1993 Pergamon Press. https://doi.org/10.1016/B978-0-08-042149-0.50011-9 DOI: https://doi.org/10.1016/B978-0-08-042149-0.50011-9
La Mantia, FP. Ed., Thermotropic Liquid Crystal Polymer Blends, 1995, Technomic.
Isayev, Kyu AIT & Cheng SZD, Liquid-Crystalline Polymer Systems, 1996, ACS Symp. Ser. https://doi.org/10.1021/bk-1996-0632 DOI: https://doi.org/10.1021/bk-1996-0632
Donald M, Windle AH & Hanna S., Liquid Crystalline Polymers, 2006, Cambridge Univ. Press. https://doi.org/10.1017/CBO9780511616044 DOI: https://doi.org/10.1017/CBO9780511616044
Hull D., Introduction to Composite Materials. Cambridge University Press, Cambridge, 1987 p. 3.
Evstatiev M, Fakirov S, Bechtold G and Friedrich K, Adv. Polym. Technol., 2000,19, 249. https://doi.org/10.1002/1098-2329(200024)19:4<249::AID-ADV2>3.0.CO;2-R DOI: https://doi.org/10.1002/1098-2329(200024)19:4<249::AID-ADV2>3.0.CO;2-R
21 Chakraborty S, Sahoo NG, Jana GK and Das CK, J. Appl. Polym. Sci., 2004, 93, 711. https://doi.org/10.1002/app.20482 DOI: https://doi.org/10.1002/app.20482
22 Tjong SC, Mater. Sci. Eng. Rep., 2003, 41, 1. https://doi.org/10.1002/polb.10497 DOI: https://doi.org/10.1002/polb.10497
23 Song CH and Isayev AI, Polymer, 2001, 42, 2611. https://doi.org/10.1016/S0032-3861(00)00555-3 DOI: https://doi.org/10.1016/S0032-3861(00)00555-3
24 Handlos AA and Baird DG, Int. Polym. Proc., 1996, 11, 82. https://doi.org/10.3139/217.960082 DOI: https://doi.org/10.3139/217.960082
Shibayev VP & Byelyayev SV, Polymer Science U.S.S.R., 1990, V32, 12, 2384. https://doi.org/10.1016/0032-3950(90)90414-2 DOI: https://doi.org/10.1016/0032-3950(90)90414-2
Jaffe M, Journal of Statistical Physics, 1991, V62, 5–6, 985. https://doi.org/10.1007/BF01128172 DOI: https://doi.org/10.1007/BF01128172
Shibaev VP & Lam L, Liquid Crystalline Polymers, 1994, Springer.
Harper CA, Ed., Modern Plastics Handbook, 2000, ISBN 0-07-026714-6.
Callister C, Materials Science and Engineering - An Introduction, 2007, V557-558.
DeMeuse MT & Jaffe M, Mol. Cryst. Liq. Cryst. Inc. Nonlin. Optics, 1988, V157, 535.
DeMeuse MT & Jaffe M, Polym. Prep., 1989, V30, 540.
DeMeuse MT & Jaffe M, Liq. Cryst. Polym., 1990, R.A. Weiss & C.K Ober, Eds., 435.
DeMeuse MT, SPE ANTEC‘93, 1993, 1722. https://doi.org/10.1016/0306-3747(93)90145-4 DOI: https://doi.org/10.1016/0306-3747(93)90145-4
Lin YG & Winter H H, Poly. Eng. Sci., 1992, V32, 773. https://doi.org/10.1002/pen.760321203 DOI: https://doi.org/10.1002/pen.760321203
Ding R & Isayev AI, SPE ANTEC’93, 1993, 1176. https://doi.org/10.1016/0002-8223(93)91658-D DOI: https://doi.org/10.1016/0002-8223(93)91658-D
Weiss RA, Huh W, Nicolais L, Polym. Eng. Sci., 1987, V27, 684. https://doi.org/10.1002/pen.760270913 DOI: https://doi.org/10.1002/pen.760270913
Blizard KG & Baird DG, Polym. Eng. Sci., 1987, V27, 653. https://doi.org/10.1002/pen.760270909 DOI: https://doi.org/10.1002/pen.760270909
Nobile MR, Amendola E., Nicolais L, Acierno D, Carfagna C., Polym. Eng. Sci., 1989, V29, 244. https://doi.org/10.1002/pen.760290406 DOI: https://doi.org/10.1002/pen.760290406
Hong SM, Kim BC, Hwang SS & Kim KU, Polym. Eng. Sci., 1993, V33, 630. https://doi.org/10.1002/pen.760331008 DOI: https://doi.org/10.1002/pen.760331008
Whitehouse C; Lu XH, Gao P, Chai CK, Polym. Eng. Sci., 1997, V37, 1944. https://doi.org/10.1002/pen.11845 DOI: https://doi.org/10.1002/pen.11845
Sun LM., Sakamoto T, Ueta S, Koga K, Takayanagi M, Polym. J., 1994, V29, 939–952. https://doi.org/10.1295/polymj.26.939 DOI: https://doi.org/10.1295/polymj.26.939
Wei K-H, Ho J-C, J Appl Polym Sci,, 1997, V63, 1527. https://doi.org/10.1002/(SICI)1097-4628(19970321)63:12<1527::AID-APP3>3.0.CO;2-Q DOI: https://doi.org/10.1002/(SICI)1097-4628(19970321)63:12<1527::AID-APP3>3.0.CO;2-Q
Ho J-C, Wei K-H, Polymer, 1999, V40, 717. https://doi.org/10.1016/S0032-3861(98)00014-7 DOI: https://doi.org/10.1016/S0032-3861(98)00014-7
Pisitsak P, Magaraphan R, Jana SC, J. Nanomaterials, 2012, V2012, 1. https://doi.org/10.1155/2012/642080 DOI: https://doi.org/10.1155/2012/642080
Magagnini PL, Paci M, La Mantia FP, Valenza A, Polym. Inter., 1992, V28, 4, 271. https://doi.org/10.1002/pi.4990280405
Lin Q, Ho JJ, Yee AF, Polym. Eng. & Science, 1993, V33, N13, 23. https://doi.org/10.1002/pen.760331303 DOI: https://doi.org/10.1002/pen.760331303
Lin Q, Yee AF, Polymer, 1994, V35, N16, 3463. https://doi.org/10.1016/0032-3861(94)90909-1 DOI: https://doi.org/10.1016/0032-3861(94)90909-1
Brostow W, Hess†Betty M, López L , Sterzynski T, Polymer, 1996, V37, 9, 1551. https://doi.org/10.1016/0032-3861(96)83703-7 DOI: https://doi.org/10.1016/0032-3861(96)83703-7
Carius HE, Schönhals A, Guigner D, Sterzynski T, Macromolecules, 1996, V29, 14, 5017. https://doi.org/10.1021/ma951706u DOI: https://doi.org/10.1021/ma951706u
Lee HS, Jung WH, Kim WN, Polymer Bulletin, 1996, V37, 503. https://doi.org/10.1007/BF00556812 DOI: https://doi.org/10.1007/BF00556812
Kohli A, Chung N, Weiss RA, Polymer Engineering & Science, 1989, V29, 9, 573. https://doi.org/10.1002/pen.760290902 DOI: https://doi.org/10.1002/pen.760290902
Singer M, Simon GP, Varley R, Polymer Engineering & Science, 1996, V36, 8, 1038. https://doi.org/10.1002/pen.10492 DOI: https://doi.org/10.1002/pen.10492
Lam YC, Yue CY, Yang YX, Tam KC, J. Appl. Polym. Science, 2003, V87, 2, 258. https://doi.org/10.1002/app.11361 DOI: https://doi.org/10.1002/app.11361
Huang G, Chan PK, Kamal MR, Canadian J. Chem. Eng., 2003, V81, 2, 243. https://doi.org/10.1002/cjce.5450810209 DOI: https://doi.org/10.1002/cjce.5450810209
Wei K-H, Jang H-C, Ho J-C, Polymer, 1997, V38, N14, 3521. DOI: https://doi.org/10.1016/S0032-3861(96)00911-1
Olszynski P, Kozlowski M, Kozlowska A, Materials Research Innovations, 2002, V6, 1. https://doi.org/10.1080/14328917.2002.11784703 DOI: https://doi.org/10.1080/14328917.2002.11784703
García M, Eguiazábal JI, Nazábal J, Polymer Composites, 2004, V23(4), 592–602. https://doi.org/10.1002/pc.10459 DOI: https://doi.org/10.1002/pc.10459
Valera Rizo H, Vic Fernandez I, Del Agua Hernandez D, 2016, WO/2016/135671.
Tyan H-L, Wei G-H, J. Polym. Sci., Part B: Polym. Phys., 1998, V36, 1959. https://doi.org/10.1002/(SICI)1099-0488(199808)36:11<1959::AID-POLB17>3.0.CO;2-6 DOI: https://doi.org/10.1002/(SICI)1099-0488(199808)36:11<1959::AID-POLB17>3.0.CO;2-6
Kollodge JS, Porter RS, Macromolecules 1995, V28, 12, 4106. https://doi.org/10.1021/ma00116a009 DOI: https://doi.org/10.1021/ma00116a009
Tovar G, Carreau PJ, Schreiber HP, Colloids and Surfaces, 2000, V161, 1, 213. https://doi.org/10.1016/S0927-7757(99)00339-8 DOI: https://doi.org/10.1016/S0927-7757(99)00339-8
Bum S, Ok O, Yoon KH, J. Appl. Polym. Science, 2001, V82, 11, 2799. https://doi.org/10.1002/app.2134 DOI: https://doi.org/10.1002/app.2134
Yin B, Zhao Y, Yang W, Pan M, Yang M, Polymer, 2006, V47, 25, 8237-8240. https://doi.org/10.1016/j.polymer.2006.09.044 DOI: https://doi.org/10.1016/j.polymer.2006.09.044
Maganini PL, Pedretti U, Perego G, Bresci B, Carrozzino S, Roggero A, 1989, US4,833,299.
Magagnini PL, Bresci B, Paci M, Roggero A, Pedretti U, La Mantia FP, Rec. Adv. Chem. Eng. 1991, 28, 271. https://doi.org/10.1002/pi.4990280405 DOI: https://doi.org/10.1002/pi.4990280405
La Mantia FP, Valenza A, Paci M, Magagnini PL, Pedretti U, Roggero A, Polym. Eng. Sci. 1992, 30, 13.
Pazzagli F, Paci M, Magagnini P, Veracini CA, J. Appl. Polym Sci., 2000, V77, 141. https://doi.org/10.1002/(SICI)1097-4628(20000705)77:1<141::AID-APP19>3.0.CO;2-9 DOI: https://doi.org/10.1002/(SICI)1097-4628(20000705)77:1<141::AID-APP19>3.0.CO;2-9
Kotliar AM, J. Polym. Sci., Macromol. Rev., 1981, V16, 367. https://doi.org/10.1002/pol.1981.230160106 DOI: https://doi.org/10.1002/pol.1981.230160106
Pilati F, Marianucci E, Berti CJ, J. Appl. Polym. Sci., 1985, V30, 1267. https://doi.org/10.1002/app.1985.070300330 DOI: https://doi.org/10.1002/app.1985.070300330
Kimura M, Porter RS, J. Polym. Sci., Polym. Phys. Ed., 1983, V21, 367. https://doi.org/10.1002/pol.1983.180210304 DOI: https://doi.org/10.1002/pol.1983.180210304
Godard P, Dekoninck JM, Devlesaver V, Devaux J, J. Polym. Sci. Polym. Chem., 1986, V24, 3301. https://doi.org/10.1002/pola.1986.080241214 DOI: https://doi.org/10.1002/pola.1986.080241214
Henrichs PM, Tribone J, Massa DJ, Hewitt JM, Macromolecules, 1988, V21, 1282. https://doi.org/10.1021/ma00183a018 DOI: https://doi.org/10.1021/ma00183a018
Laivins GV, Macromolecules, 1989, V22, 3974. https://doi.org/10.1021/ma00200a027 DOI: https://doi.org/10.1021/ma00200a027
Su KF, Wei KH, J. Appl. Polym. Sci., 1995, V56, 79. https://doi.org/10.1002/app.1995.070560111 DOI: https://doi.org/10.1002/app.1995.070560111
Wu L, Jang J, He J, Polymer, 2006, V 47, Issue 1, 448. https://doi.org/10.1016/j.polymer.2005.11.044 DOI: https://doi.org/10.1016/j.polymer.2005.11.044
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
