Determination of Kinetic Parameters and Thermal Characteristics of Epoxy Casuarina Bio Composites

R. Nalini  Suja; B.  Sridevi; Senthil Muthu  Kumar Thiagamani

doi:10.6000/1929-5995.2024.13.09

Authors

R. Nalini Suja Department of Chemistry, Panimalar Engineering College, Chennai 600123,Tamil Nadu, India https://orcid.org/0000-0001-6524-5808
B. Sridevi Department of Chemistry, Presidency College, Chennai-600005, Tamil Nadu, India
Senthil Muthu Kumar Thiagamani Department of Mechanical Engineering, Kalasalingam Academy of Research and Education, Krishnankoil–626126, Tamil Nadu, India; Department of Mechanical Engineering, INTI International University, Persiaran Perdana BBN, Putra Nilai, 71800 Nilai, Negeri Sembilan, Malaysia and Centre for Advanced Composite Materials (CACM) Universiti Teknologi Malaysia, 81310 Skudai, Johor Bahru, Johor, Malaysia https://orcid.org/0000-0003-1443-7222

DOI:

https://doi.org/10.6000/1929-5995.2024.13.09

Keywords:

Epoxy composites, casuarina leaf fibre, Coats-Redfern(CR), Broido and Horowitz-Metzger(HM) models

Abstract

By reinforcing casuarina equisetifolia leaf, a flexible bio fibre, in different volume proportions of 4%, 8%, 12%, 16%, and 20% into the epoxy resin, a bio-based composite was produced utilizing the hand layup method. FT IR spectrum was used to verify the production of epoxy casuarina composite. The produced composites have undergone an extensive thermal investigation using Differential Thermal Analysis (DTA), Thermogravimetric Analysis (TGA), Derivative Thermogravimetric (DTG) study and Differential Scanning Calorimetry (DSC) analysis. It has been observed that increasing the percentage of casuarina fibre content enhances the thermal stability of epoxy resin. Horowitz- Metzger (HM), Broido and Coats-Redfern (CR) models were worked and the result revealed that the decomposition of casuarina epoxy composite followed one Dimensional Diffusion Model with coefficient of correlation value close to 1. The thermodynamic parameters including Activation energy (Ea), frequency factor (A), Gibbs free energy (ΔG), entropy (ΔS) and enthalpy (ΔH) of epoxy casuarina composites were found to increase with increase in fibre contents. This makes the composite more suitable for making high performance engineering material for various applications.

References

Arunprakash VR, Viswanathan R. Fabrication and characterization of Echinoidea spike particles and Kenaf natural fibrerein forced Azadirachta Indica blended epoxy multihybrid bio composite. Appl Sci Manuf 2019; 118: 317-326. https://doi.org/10.1016/j.compositesa.2019.01.008 DOI: https://doi.org/10.1016/j.compositesa.2019.01.008

Zamani K, Kocaman S, Isik M, Soydal U, Ozmeral N, Ahmetli G. Water sorption, thermal and fire resistance properties of natural shell-based epoxy composites. J Appl Polym Sci 2022; 39(35). https://doi.org/10.1002/app.52835 DOI: https://doi.org/10.1002/app.52835

Yao F, Wu Q, Lei Y, Guo W, Xu Y. Thermal decomposition kinetics of natural fibers: Activation energy with dynamic thermogravimetric analysis. Polym Degrad Stab 2008; 93(1):90-98. https://doi.org/10.1016/j.polymdegradstab.2007.10.012 DOI: https://doi.org/10.1016/j.polymdegradstab.2007.10.012

Bera T, Acharya SK, Mishra P. Synthesis, mechanical and thermal properties of carbon black/epoxy composites. Int J Eng Sci Technol 2018; 10(4): 12-20. https://doi.org/10.4314/ijest.v10i4.2 DOI: https://doi.org/10.4314/ijest.v10i4.2

Ibrahim MS, Sapuanand SM, Faieza AA. Mechanical and thermal properties of composites from unsaturated polyester filled with oil palm ash. J Mech Eng Sci 2012; 2: 133-147. https://doi.org/10.15282/jmes.2.2012.1.0012 DOI: https://doi.org/10.15282/jmes.2.2012.1.0012

Ben Samuel J, JulyesJaisingh S, Siva Kumar K, Mayakannan AV, Arunprakash VR. Visco-elastic, thermal, antimicrobial and dielectric behavior of areca fibre reinforced nano silica and neem oil toughened epoxy resin bio composite. Silicon 2021; 13: 1703-1712. https://doi.org/10.1007/s12633-020-00569-0 DOI: https://doi.org/10.1007/s12633-020-00569-0

Parivendhan Inbakumar J, Ramesh S. Mechanical, wear and thermal behaviour of hemp fibre/egg shell particle reinforced epoxy resin bio composite. Trans Can Soc Mech Eng 2018; 42(3): 280-285. https://doi.org/10.1139/tcsme-2017-0079 DOI: https://doi.org/10.1139/tcsme-2017-0079

Alshammari BA, Al-Mubaddel FS, Karim MR, Hossain M, Al-Mutairi AS, Wilkinson AN. Polymers 2019; 11: 1411. https://doi.org/10.3390/polym11091411 DOI: https://doi.org/10.3390/polym11091411

Khan R, Khare P, Baruah BP, Hazarika AK, Dey NC. Spectroscopic, Kinetic Studies of Polyaniline Flyash Composite. Adv Chem Engineer Sci2011; 1: 37-44. https://doi.org/10.4236/aces.2011.12007 DOI: https://doi.org/10.4236/aces.2011.12007

Al-Bayaty SA, Jubier NJ, Al-Uqaily RAH. Study ofthermal behavior and kinetics of epoxy/polystyrene composites by using TGA an DSC. J Xi'an Univ Archit Technol 2020; 12(3): 331.

Farha AH, Al Naim AF, Mansour SA. Thermal Degradation of Polystyrene (PS) Nanocomposites Loaded with Sol Gel-Synthesized ZnO Nanorods. Polymers 2020; 12: 1935. https://doi.org/10.3390/polym12091935 DOI: https://doi.org/10.3390/polym12091935

Abderrahim B, Abderrahman E, Mohamed A, Fatima T, Abdesselam T, Krim O. Kinetic Thermal Degradation of Cellulose, Polybutylene Succinate and a Green Composite Comparative Study. World J Environ Eng 2015; 3(4): 95-110.

Chinnasamya V, Subramanib SP, Palaniappanc SK, Mylsamyd B, Aruchamye K. Characterization on thermal properties of glass fiber and kevlar fiber with modified epoxy hybrid composites. J Mater Res Technol 2020; 9(3): 3158-3167. https://doi.org/10.1016/j.jmrt.2020.01.061 DOI: https://doi.org/10.1016/j.jmrt.2020.01.061

Rangappa SM, Siengchin S, Parameswaranpillai J, Jawai M, Ozbakkaloglu T. Lignocellulosic fiber reinforced composites Progress, performance, properties, applications, and future perspectives. Polym Compos 2022; 43(2): 645-691. https://doi.org/10.1002/pc.26413 DOI: https://doi.org/10.1002/pc.26413

Du J, Gao L, Yang Y, Chen G, Guo S, Omran M, Chen J, Ruan R. Study on thermochemical characteristics properties and pyrolysis kinetics of the mixtures of waste corn stalk and pyrolusite. Bioresour Technol 2021; 324: 124660. https://doi.org/10.1016/j.biortech.2020.124660 DOI: https://doi.org/10.1016/j.biortech.2020.124660

Sultania M, Srivatava D. The effect of CTBN concentrations on the kinetic parameters of decomposition of blends of epoxy resins modified with carboxyl terminated liquid copolymer. J Polym Environ 2011; 19: 950-956. https://doi.org/10.1007/s10924-011-0348-7 DOI: https://doi.org/10.1007/s10924-011-0348-7

Roudsari GM, Mohanty AK, Misra M. Study of the Curing Kinetics of Epoxy Resins with Biobased Hardener and Epoxidized Soybean Oil. ACS Sustainable Chem Eng 2014; 2: 2111−2116. https://doi.org/10.1021/sc500176z DOI: https://doi.org/10.1021/sc500176z

Borsoi C, Zimmernnam MVG, Zattera AJ. Thermal degradation behavior of cellulose nanofibers and nanowhiskers. J Therm Anal Calorim 2016; 126: 1867-78. https://doi.org/10.1007/s10973-016-5653-x DOI: https://doi.org/10.1007/s10973-016-5653-x

Kumar S, Gulati K, Singh SKA. Study of thermal degradation of Varieties of Plywood by Using Thermogravimetry under Nitrogen Atmosphere. Int JADV Sci Resmana 2018; 3 (8).

Vishnu R, Revathi R. Studies on physical, chemical and fibre morphological parameters of three pulpwood species viz. Eucalyptus, Melia and Casuarina for pulp and paper making. Int J Chem Stud 2019; 7(5): 3155-3162

Coats AW, Redfern JP. Kinetic Parameters from Thermogravimetric Data. Nature 1964; 201: 68-69. https://doi.org/10.1038/201068a0 DOI: https://doi.org/10.1038/201068a0

Broido A. A simple, sensitive graphical method of treating thermogravimetric analysis data. J Polym Sci Part A 1969; 7(10):1761-73. https://doi.org/10.1002/pol.1969.160071012 DOI: https://doi.org/10.1002/pol.1969.160071012

Horowitz HH, Metzger G. A New Analysis of Thermogravimetric Traces. Anal Chem 1963; 35(10): 1464-1468. https://doi.org/10.1021/ac60203a013 DOI: https://doi.org/10.1021/ac60203a013

Ebrahimi-Kahrizsangi R, Abbasi MH. TranNonferrous met Soc China 2008; 18(1): 217-221. https://doi.org/10.1016/S1003-6326(08)60039-4 DOI: https://doi.org/10.1016/S1003-6326(08)60039-4

Alwani MS, Abdul Khalil HPS, Sulaiman O, Islam MN Dungani R. An approach to using agricultural waste fibres in biocomposites application: Thermogravimetric analysis and activation energy study. Bio Res 2014; 9(1): 218-230. https://doi.org/10.15376/biores.9.1.218-230 DOI: https://doi.org/10.15376/biores.9.1.218-230

Glowinska E, Datta J, Parcheta P. Effect of sisal fiber filler on thermal properties of bio-based polyurethane composites. J Therm Anal Calorim 2017; 130:113-122. https://doi.org/10.1007/s10973-017-6293-5 DOI: https://doi.org/10.1007/s10973-017-6293-5

Acikalin K. Thermogravimetric analysis of walnut shell as pyrolysis feedstock. J Therm Anal Calorim 2011; 105(1): 145-150. https://doi.org/10.1007/s10973-010-1267-x DOI: https://doi.org/10.1007/s10973-010-1267-x

Zhang X, Huang R. Thermal Decomposition Kinetics of Basalt Fiber Reinforced Wood Polymer Composites. Polymers 2020; 12: 2283. https://doi.org/10.3390/polym12102283 DOI: https://doi.org/10.3390/polym12102283

Titok V, Leontiev V, Shostak L, Khotyleva. Thermogravimetric Analysis of the Flax Bast Fibre Bundle. J Nat Fibers 2006; 3(1): 35-41. https://doi.org/10.1300/J395v03n01_04 DOI: https://doi.org/10.1300/J395v03n01_04

Mahmood H, Shakeel A, Abdullah A, Khan MI, Moniruzzaman M. A Comparative Study on Suitability of Model-Free and Model-Fitting Kinetic Methods to Non-Isothermal Degradation of Lignocellulosic Materials. Polymers 2021; 13: 2504. https://doi.org/10.3390/polym13152504 DOI: https://doi.org/10.3390/polym13152504